With 600 watts of power and two channels, instrumental and mic inputs, plus effects, Clarus is our most full-featured integrated amp.
System |
|
Frequency Response |
20 Hz-20 kHz (±0.5 dB) |
AC Power |
100V to 240V, 50/60 Hz, automatically switched |
Size |
10" x 8" x 3.5" |
Weight |
4 lbs |
Preamp |
|
Frequency Response |
20 Hz - 20 kHz (±0.5 dB) |
Signal to Noise Ratio |
>110 dB at direct out |
Controls and Inputs |
|
Mic Input |
600 ohm balanced, XLR connector, switchable 10 dB gain |
Phantom Power |
48 volts, on/off switch w/LED indicator |
Instrument Input |
1 M Ohm impedance, 1/4 inch jack |
Direct Out |
+4 dB, balanced, XLR, ground lift, pre/post EQ selector, switchable 10 dB pad |
Effects Loop |
Parallel type |
Low Control |
Shelving type, ±12 dB at 50 Hz |
Low Mid Control |
±12 dB at 250 Hz |
Hi Mid Control |
±12 dB at 1200 Hz |
Treble Control |
Shelving type, ±12 dB at 8 kHz |
Low Cut Filter |
-12 dB/octave sweepable from 30 to 150 Hz |
Phase Reverse |
Switchable 180 degree phase reverse |
Speaker Emulator |
(if selected) -12 dB/octave at 4 kHz |
Effects |
|
Type |
24 bit digital with 3 programs |
Programs |
Reverb with variable decay time, |
Power Amp |
|
Topology |
Class D (PWM) |
Switching Frequency |
500 kHz |
Output Power 8 Ohm |
300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient |
Output Power 4 Ohm |
500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient |
Supplied Accessories |
Gig bag with shoulder strap |
2 channel