Clarus SL-R™

With 600 watts of power and one channel with effects, Clarus SL-R is an exceptionally portable integrated amp—one designed for the road.

Features

Extended frequency range, high fidelity sound
Light weight (<2.5 lbs.), small size (2.1x7.2x7.4 inches)
LoZ and HiZ 1/4 inch inputs for piezo pickup optimization
Input and Master level controls
Four band EQ
Sweepable low cut filter
Effects loop
Selectable reverb and delay effects with level and rate controls
Direct out with selectable 10 dB pad, pre/post switch and ground lift
Mute switch
Selectable internal jumper options for gain and limiter
High fidelity, low noise operation: 110 dB SNR at direct out
Automatic voltage switching for universal AC mains operation
650 Watt output at 4 ohms (music power)
Dual speaker outputs with speakon connectors
¼-20 mounting nut on chassis bottom for mounting on mic stand or combo amp bracket
Comes with padded case

System
Frequency Response	30 Hz-20 kHz (±0.5 dB)
Signal to Noise Ratio	>110 dB at direct out
AC Power	100V to 240V, 50/60 Hz, automatically switched
Size	2.1" x 7.2" x 7.4"
Weight	2 lbs. 10 oz.
Preamp
Instrument Input	1 Mohm or 10 Mohm, ¼ inch jack
Direct Out	+4 dB, balanced, XLR connector, ground lift, pre/post EQ selector, 10 dB pad
Effects Loop	Parallel type
Low Control	Shelving type, ±12 dB at 30 Hz
Low Mid Control	±12 dB at 250 Hz
High Mid Control	±12 dB at 1200 Hz
High Control	Shelving type, ±15 dB at 10 kHz
Low Cut Filter	-12 dB/octave sweepable from 30 to 180 Hz
Effects
Type	24 bit digital with 3 programs
Programs	Reverb with variable delay time, Delay/Reverb with variable delay time Delay with variable decay time All have variable wet/dry mix
Power Amp
Topology	Class D (PWM)
Switching Frequency	500 kHz
Output Power 8 Ohm	300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient
Output Power 4 Ohm	500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient
External Speaker Out	Speakon type (pole 1), 2ohm min load
Supplied Accessories	Gig bag

2 channel